MagTek 99875125 - Manual (Page 76)

MagTek Device Drivers for Windows
68
Installing on Windows NT, 2000 and XP
With Window NT, 2000, and XP, you will use the MTD Configurator to set the device properties. You
will have to select a virtual port for each device that has been installed. Each RS-232 serial device will
have to be configured but keyboard wedge devices do not have to be configured.
You can either accept the default friendly name, or you can modify it to match your system requirements.
Usually your application can use the Virtual Port that is automatically assigned by the system. However, if
you need to change it, select the Virtual Port by which this device will be identified.
Then click the Configure… button to define the communication parameters for each serial (RS-232) or
USB device.