3 cm225 pyranometer stand, Cm225 pyranometer stand, 9. 019alu crossarm and lightning rod – Campbell Scientific UT10 10 foot Tower w/ Grounding Kit and Hinged Base User Manual
Page 24
Advertising
UT10 Weather Station
FIGURE 7-8. CM210 crossarm-to-pole bracket (top) is included with
the crossarm for attaching the crossarm to the tower’s mast or leg.
FIGURE 7-9. 019ALU Crossarm and Lightning Rod
7.2.3 CM225 Pyranometer Stand
The CM225 pyranometer stand is used to mount the LI200X, LI190SB, CS300,
CMP3, and LP02 solar radiation sensors to either a tower leg, mast, or
crossarm.
1. If using a CS300, LI200X, or LI190SB, mount the leveling base to the
CM225. The 18356 leveling base supports the CM300 pyranometer and
the LI2003S leveling base supports the LI200X and LI190SB probes (see
FIGURE 7-10). Both leveling bases use a bubble level and three
019ALU
Lightning Rod
14
Advertising