Campbell Scientific UT10 10 foot Tower w/ Grounding Kit and Hinged Base - Manual (Page 52)

UT10 Weather Station
FIGURE 8-23. Distance from Edge of Transducer Housing to Grill
8.5.12.3 Mounting Options
There are two standard mounting options available for the SR50A sensor.
The first is the SR50A Mounting Kit, part number 19517. This bracket is used
to mount the SR50A to a CM206 crossarm or a pipe with a 1 in to 1.75 in OD.
FIGURE 8-24 and FIGURE 8-25 show a couple of angles of the SR50A
mounted to a crossarm. A U-bolt attaches the bracket to the crossarm and two
screws attach the SR50A to the bracket.
Another mounting option, shown in FIGURE 8-26, utilizes a mounting stem
(pn 19484) and a NU-RAIL. The mounting stem is sized to fit a 1 in NU-
RAIL (pn 1049). This mounting method was used for the SR50 (predecessor
to the SR50A) and the stem can be used to fit the SR50A into existing SR50
mounts.
FIGURE 8-24. SR50A Mounted to a Crossarm via the 19517 Mounting
Kit
42