Ntp trusted-key – Allied Telesis AT-S100 User Manual
Page 150
Chapter 4: Configuration Terminal Mode Commands
150
Section I: Command Modes
NTP TRUSTED-KEY
Syntax
ntp trusted-key <1-
4294967295>
no ntp trusted-key <1-
4294967295>
Parameters
none
Description
Use the NTP TRUSTED-KEY command to specify a key number for a
trusted time source. You must first define a key number with the NTP
AUTHENTICATION-KEY command. Enter a value between 1 and
4294967295.
By default, no trusted keys are defined. To disable the authentication of a
device, use the no form of this command.
For procedures to configure NTP, see “Setting the Network Time” on
page 29.
Command Mode
Configuration Terminal mode
Example
The following commands set the trusted key to 222,222:
switch#configure terminal
switch(config)#ntp trusted-key 222222
Related Commands
“NTP AUTHENTICATE” on page 145