Allied Telesis AT-S100 User Manual
Page 234
Chapter 9: Simple Network Management Protocol (SNMP) Commands
234
Section II: Advanced Configuration
Examples
The following commands create an SNMPv1 group named “marcom” with
write access to a view of the Internet which has an IP address of 1.3.6.1:
switch#configure terminal
switch(config)#snmp-server group marcom v1 write
1.3.6.1
The following commands create an SNMPv1 group named “group1” with
access to a view called “nview” with notify permission:
switch#configure terminal
switch(config)#snmp-server group group1 v1 notify
nview
The following commands create an SNMPv2c group named “group2” with
access to a view called “wview” with write permission and a view called
“nview” with notify permission:
switch#configure terminal
switch(config)#snmp-server group group2 v2c write
wview notify nview
Related Commands