Allied Telesis AT-S100 - Manual (Page 200)

Chapter 6: 802.1x Access Control Commands
200 Section II: Advanced Configuration
LOGIN REMOTELOCAL
Syntax
login remotelocal
no login
Parameters
none
Description
Use the LOGIN REMOTELOCAL command to enable password checking
on the RADIUS server. To disable password checking, use the no form of
the command.
Command Mode
Line mode
Example
The following commands enable password checking on a RADIUS server
with an IP address of 192.168.1.30 and a key of “ATI:”
switch# configure terminal
switch(config)# radius-server host 192.168.1.30 auth-
port 1812
switch(config)# radius-server key ATI
switch(config)# line console 0
switch(config-line)# login remotelocal
Related Commands
“LINE CONSOLE” on page 135
“RADIUS-SERVER HOST” on page 201
“RADIUS-SERVER KEY” on page 202