Allied Telesis AT-S100 - Manual (Page 262)

Chapter 11: Virtual Local Area Networks (VLAN) Commands
262 Section II: Advanced Configuration
SHOW VLAN DYNAMIC
Syntax
show vlan dynamic
Parameters
none
Description
Use the SHOW VLAN DYNAMIC command to display information about
dynamic VLANs on the switch.
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW VLAN DYNAMIC command and
a sample of the output:
switch3#show vlan dynamic
See Figure 31 for an sample display.
Figure 31. SHOW VLAN DYNAMIC
Related Commands
“SHOW VLAN ALL” on page 258
“SHOW VLAN BRIEF” on page 260
“SHOW VLAN STATIC” on page 263
(switch3)# show vlan dynamic
VLAN ID
Name Type State Member ports
(u)-Untagged, (t) Tagged
======= ======= ====== ====== ========================
9 VLAN0009 DYNAMIC ACTIVE ge11(u) ge12(u) ge33(u) ge14(u)