Allied Telesis AT-S100 - Manual (Page 263)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 263
SHOW VLAN STATIC
Syntax
show vlan static
Parameters
none
Description
Use the SHOW VLAN STATIC command to display information about all
of the VLANs, both static and dynamic, configured on the switch.
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW VLAN STATIC command and a
sample of the output:
switch3#show vlan static
See Figure 32 for an sample display.
Figure 32. SHOW VLAN STATIC
(switch3)# show vlan static
VLAN ID
Name Type State Member ports
(u)-Untagged, (t) Tagged
======= ======= ====== ====== ========================
1 default STATIC ACTIVE ge1(u) ge2(u) ge3(u) ge4(u) ge6(u)
ge8(u) ge9(u) ge10(u) ge11(u) ge12(u)
ge13(u) ge14(u) ge15(u) ge16(u)
ge17(u) ge18(u) ge19(u) ge20(u)
ge21(u) ge22(u) ge23(u) ge24(u)
ge25(u) ge26(u) ge27(u) ge28(u) ge7(u)
3 VLAN0003 STATIC ACTIVE ge5(u) ge7(t)
4 VLAN0004 STATIC ACTIVE ge7(t)