Allied Telesis AT-S100 - Manual (Page 260)

Chapter 11: Virtual Local Area Networks (VLAN) Commands
260 Section II: Advanced Configuration
SHOW VLAN BRIEF
Syntax
show vlan brief
Parameters
none
Description
Use the SHOW VLAN BRIEF command to display information about all of
the VLANs, both static and dynamic, configured on the switch.
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW VLAN BRIEF command and a
sample of the output:
switch3#show vlan brief
See Figure 30 for an example display.
Figure 30. SHOW VLAN BRIEF
(switch3)# show vlan brief
VLAN ID
Name Type State Member ports
(u)-Untagged, (t) Tagged
======= ======= ====== ====== ========================
1 default STATIC ACTIVE ge1(u) ge2(u) ge3(u) ge4(u) ge6(u)
ge8(u) ge9(u) ge10(u) ge11(u) ge12(u)
ge13(u) ge14(u) ge15(u) ge16(u)
ge17(u) ge18(u) ge19(u) ge20(u)
ge21(u) ge22(u) ge23(u) ge24(u)
ge25(u) ge26(u) ge27(u) ge28(u) ge7(u)
3 VLAN0003 STATIC ACTIVE ge5(u) ge7(t)
4 VLAN0004 STATIC ACTIVE ge7(t)