Cleaning the platen and the card feed rollers – HID DTC4500 User Guide User Manual
Page 120
Advertising
©
2011
HID
Global
Corporation
All
rights
reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1
120
Cleaning the Platen and the Card Feed Rollers
Step Procedure
3 Insert
the
Cleaning Card into the Single Feed Card Slot until the card stops.
If your Printer is equipped with a Magnetic Encoder, you must insert the
Cleaning Card with the printed side up and with the small Liner Strip towards
the front of the Printer.
4
From your computer, open the Printer Driver and select Printing Preferences.
Advertising