Connecting the printer power – HID DTC4500 User Guide User Manual
Page 27
Advertising
©
2011
HID
Global
Corporation
All
rights
reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1
27
Connecting the Printer power
Follow this procedure. (Note: Do not connect the Printer’s USB cable until prompted during the Printer
Driver installation.)
Step Procedure
1
Plug the AC adapter power cable into the back of the Printer.
2
Plug the wall power cable into the AC power adapter.
Plug the wall power cable into a standard 110VAC power outlet.
Advertising