Printer installed on network – HID DTC4500 User Guide User Manual
Page 35
Advertising
©
2011
HID
Global
Corporation
All
rights
reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1
35
Printer Installed On Network
Perform this procedure for a Printer installed on a Network.
Step Procedure
1
Connect the Printer to the Network. (Note: It will take 5 to 10 minutes for the
Printer to assign an IP address in order to connect the Printer via an Ethernet
cable to the back of your PC versus a Network.)
2
Locate the IP address on your Printer and write it down.
3
Find the IP Address on a DTC4500.
a. Navigate through the Printer display to reach the IP address.
4
Find the IP Address.
Advertising