Installing the print ribbon cartridge (dtc4500), Installing the ribbon – HID DTC4500 User Guide User Manual
Page 18
©
2011
HID
Global
Corporation
All
rights
reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1
18
Installing the Print Ribbon Cartridge (DTC4500)
Fargo Card Printers require highly specialized supplies to function properly.
• The Fargo DTC4500 Card Printer uses a refill system.
• To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo-certified
supplies.
• For this reason, your Fargo warranty is void, where not prohibited by law, if you use non-Fargo-certified
supplies.
• Printer cleaning is recommended with each Ribbon change to ensure quality printed cards.
• Resin-only Print Ribbons consist of a continuous roll of a single resin color. No protective overlay panel
(O) is provided since resin images do not require the protection of such an overlay.
Installing the Ribbon
Step
Procedure
1
Lift up the Cleaning Roller Cover.
2
Load the Print Ribbon into the Ribbon Drawer.