Kramer Electronics VS-3232A - Manual (Page 11)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Balanced Stereo Audio Matrix Switcher
6
The keypad selector buttons (illustrated in Figure 2 and Table 2 ) are used to
select the outputs and the inputs when routing
1
. Use the  keypad button to
shift the display content to the left, and the  keypad button to shift the
display content to the right (as the LCD display is only large enough to show
13 cross-points out of a total of 32). Most keypad buttons have more than one
function, as defined in
Table 2 .
Table 2: VS-3232A Keypad Selector Buttons Functions
Keypad # Function
1
4
7
5
8
6
9
0
2 3
Figure 2: VS-3232A Keypad
Selector Buttons
1 ALL
2
– Press ALL followed by an input number to
connect that input to all the outputs
LEFT – Press to select the left channel of a selected
input or output
3
2 L+R (Left and Right) – Press to select both left and
right channels of a selected input or output
3 OFF
2
– Press OFF followed by an output number
to disconnect that output
RIGHT – Press to select the right channel of a
selected input or output
4 STO
2
– Press to store the current setting in the non-
volatile memory
6 RCL
2
– Press to recall a setup from the
non-volatile memory
7 LEVEL UP – Press to increase the audio output
level of the selected input or output
4
9 LEVEL DOWN – Press to decrease the audio level
of the selected input or output
4
 (Backward) ESC – Press to exit the current operation
 (Forward)
ENT – Press to complete the input-output setup
when using a one-digit number instead of two digits
5
Press to enter the options in a setup menu
Figure 3 and Table 3 define the rear panel of the VS-3232A.
1 See Section 8.4
2 This button is enabled and illuminated after pressing the MENU button
3 For audio level adjustment
4 You can adjust the left, right or both channels of an input or an output
5 For example, to enter input 5, you can either press 0, 5 or 5, ENT