Kramer Electronics VS-3232A - Manual (Page 54)

Flash Memory Upgrade
49
49
Verify that in the Buffer Information column, the “HEX File: VS3232A.hex”
appears.
Figure 29: Atmel – Flip Window (Connected)
9. Click Run.
After each stage of the operation is completed, the check-box for that stage
becomes colored green
1
.
When the operation is completed, all 4 check-boxes will be colored green
and the status bar message: Memory Verify Pass appears
2
:
Figure 30: Atmel – Flip Window (Operation Completed)
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again