Kramer Electronics VS-3232A - Manual (Page 51)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Flash Memory Upgrade
46
10.1.3 Upgrading Firmware
Follow these steps to upgrade the firmware:
1. Double click the desktop icon: “Shortcut to FLIP.EXE”.
The Splash screen appears as follows:
Figure 23: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”
window:
Figure 24: Atmel – Flip Window
3. Press the keyboard shortcut key F2 (or select the “Select” command from
the Device menu, or press the integrated circuit icon in the upper right corner
of the window).
The “Device Selection” window appears: