1 setting the machine, 6 connecting a control interface, 1 connecting the rs232 control interface – Kramer Electronics VS-3232A User Manual
Page 26: Setting the machine, Connecting a control interface, Connecting the rs-232 control interface, Table 7: machine # dip-switch settings, N 7.6, Table 7, On 7.5.1
VS-3232A 32x32 Audio Matrix Switcher Configurations
21
21
7.5.1 Setting the Machine #
To control a unit remotely via RS-232, RS-485, IR or the Ethernet, each unit
has to be identified via its unique Machine #. Set the Machine #
1
on a
Table 7: Machine # DIP-switch Settings
Mach. #
DIP 1
DIP 2
DIP 3
DIP 4
Mach. #
DIP 1
DIP 2
DIP 3
DIP 4
1
ON
OFF
OFF
OFF
9
ON
OFF
OFF
ON
2
OFF
ON
OFF
OFF
10
OFF
ON
OFF
ON
3
ON
ON
OFF
OFF
11
ON
ON
OFF
ON
4
OFF
OFF
ON
OFF
12
OFF
OFF
ON
ON
5
ON
OFF
ON
OFF
13
ON
OFF
ON
ON
6
OFF
ON
ON
OFF
14
OFF
ON
ON
ON
7
ON
ON
ON
OFF
15
ON
ON
ON
ON
8
OFF
OFF
OFF
ON
7.6 Connecting a Control Interface
You can connect a control interface (RS-232 or RS-485). It is recommended
that the control interfaces are identical on each switcher in the series of 32x32
matrix switchers; either RS-232 or RS-485 (one control interface suffices).
For example, in an interconnected varied-format 32x32 switcher application,
if the switcher that connects to the PC connects via the RS-232 control
interface, each switcher would interconnect via the RS-232 control interface
and not via the RS-485 control interface.
You may transfer from one interface to another via the Kramer VP-43xl
Interface Converter
2
. You can choose the RS-232 control interface, if the
range is less than 25 meters for each point-to-point connection.
For greater ranges, you can choose the RS-485 control interface, and operate
the switcher from an extended distance of up to 1000 meters.
7.6.1 Connecting the RS-232 Control Interface
You can connect several switchers (from the series of 32x32 or 16x16 matrix
switchers) and the control unit in an RS-232 daisy chain arrangement, with or
without using a Null-modem adapter, as
The RS-232 daisy chain switcher arrangement is transparent. This lets you arrange
the switchers (from the series of 32x32 or 16x16 matrix switchers) according to
your requirements, and not according to a fixed sequence dependent on the
Machine #.
1 When using a single unit, set the unit to MACHINE # 1
2 For more information on the VP-43xl, go to our Web site