Kramer Electronics VS-3232A - Manual (Page 25)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
VS-3232A 32x32 Audio Matrix Switcher Configurations
20
Set the DIP-switches as follows:
Table 5: DIP-switch Settings for VS-3232A and VS-3232V(xl) Switchers
Machine Name Machine # Follow-System Master/Slave
1 2 3 4 5 6
VS-3232V(xl) Y (G) ON OFF OFF OFF ON OFF
U (B) ON OFF OFF OFF ON ON
V (R) ON OFF OFF OFF ON ON
VS-3232A Audio OFF ON OFF OFF ON OFF
Connect the communication line between the switchers via the RS-232 or
RS-485 control interface as section 7.6 describes.
7.5 DIP-switch Settings
By default all the DIP-switches are set to OFF. Configure the VS-3232A by
setting the eight DIP-switches as
Figure 14 and Table 6 define:
1 2
ON
3 4 5 6 7 8
}
RS-232 NULL-MODEM
MACHINE #
FOLLOW-SYSTEM
CONFIGURATION
SETUP
MASTER/SLAVE
CONFIGURATION
SETUP
RS-485 TERMINATION
Figure 14: DIP-switches
Table 6: DIP-switch Definitions
DIP-switch # Function:
1-4 Set the machine # (see Table 7 in Section 7.5.1
5
)
Enables (ON) or disables (OFF) the Follow-System configuration setup in a
multi-switcher configuration
6 Enables (ON) or disables (OFF) the Master/Slave configuration setup in a
multi-channel configuration
7 Disables the use of a null modem adapter
1
with RS-232 as follows:
Set OFF for RS-232 input connection via a null modem adapter
Set ON for RS-232 straight connection without a null modem adapter
8 Set ON for RS-485 termination for the first and the last machine (RS-485 line
terminates with 110
Ω); for others set OFF (RS-485 line is open)
1 See section 7.6.1