Kramer Electronics VS-3232A - Manual (Page 38)

Operating Your Video Matrix Switcher
33
33
8.5 Storing and Recalling Setups
You can store up to 59 settings in the non-volatile memory with the ability to
recall each of those settings.
A stored and recalled setup includes the cross-point connections as well as the
audio level for all the 32 inputs and 32 outputs.
8.5.1 Storing Setups
To store a setting, do the following:
1. Press the MENU button once.
The Menu buttons
1
illuminate and are enabled.
2. Press the illuminated STO button.
The LCD display shows the message:
STORE => __
3. Insert a digit from 01 to 59 (for example, press 1 twice for 11).
In the At Once mode, the action is immediately executed and the LCD
display briefly shows
1
:
Setup STORED
Memory 11 now stores the current setting.
Note that when saving a setup to an already allocated memory, the TAKE
button blinks and the LCD display shows the message:
Setup NOT Empty
CONFIRM
You can either press the:
• TAKE button to overwrite the existing setup
• ESC button to save the setup to a different memory location
• ESC button twice to exit the storing operation
1 In the confirm mode, the TAKE blinks and you have to press the TAKE button to confirm the operation