Kramer Electronics VS-3232A - Manual (Page 44)

The MENU Commands
39
39
9 The MENU Commands
The menu lets you configure the VS-3232A to best suit your needs.
To enter the configuration menu, press the menu button three times. The
MENU button illuminates. And the following message appears on the LCD
display:
Start configuration menu
MENU to view setups ENT to change them
When browsing through the configuration menu, the enabled buttons are
illuminated.
The ESC button is not illuminated, but is always enabled.
Use the configuration menu as follows:
1. Press the MENU button to scroll through the menu items
1
.
2. Press the ENT button to enter the options in a desired setup.
3. After entering a setup, you can select between several options.
Select a setup option by pressing one of the illuminated buttons in the
Selector Buttons area.
After selecting the desired option, a description of the desired change
appears on the LCD display and the TAKE button blinks.
4. Press the blinking TAKE button to execute the change.
A description of the current state appears on the LCD display for about a
second and then the unit automatically switches to the next item in the menu.
In the example, illustrated in Figure 22 , the SYNC configuration is changed
through the configuration menu. You can scroll through the menu items by
pressing the menu button, until you reach the desired item.
1 The LCD display shows the current status of the selected menu item