Kramer Electronics VS-3232A - Manual (Page 41)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Video Matrix Switcher
36
2. Press the FOLLOW button.
The FOLLOW button blinks and the LCD display shows the following
message:
Set the SYSTEM FOLLOW mode
press FLASHING button to confirm
3. Press the FOLLOW button once again.
If there are no switchers online in the FOLLOW-System mode or if one or
more switchers that are in the FOLLOW-System mode are online but their
cross-points status is exactly the same as that of the VS-3232A, the
VS-3232A immediately moves to the FOLLOW System mode.
The FOLLOW stops blinking and then illuminates, the BREAKAWAY
button no longer illuminates and the LCD display restores its last content.
If the cross-points status of the VS-3232A is different from the other online
switchers in the FOLLOW-System mode, the FOLLOW button stops blinking
and the TAKE button blinks, and the LCD display shows the following
message:
press TAKE to confirm
possible changing existing cross-points
4. Press the TAKE button.
The VS-3232A moves to the FOLLOW-System mode. The FOLLOW
button illuminates, the BREAKAWAY button no longer illuminates, the
cross-points change according to the status in the system, and the LCD
display shows the new cross point settings.
To set the VS-3232A unit to function in the BREAKAWAY-from-System
mode:
1. Press the BREAKAWAY button.
The BREAKAWAY button blinks and the LCD display shows the following
message:
Set the STAND ALONE mode
press FLASHING button to confirm
2. Press the BREAKAWAY button once again.
The switcher moves to the BREAKAWAY mode. The BREAKAWAY
button illuminates, the FOLLOW button no longer illuminates and LCD
display restores it last content