Norgren VS18 Series Valve Advantage - Manual (Page 23)

VS18/VS26 MAINTENANCE & INSTRUCTION BOOKLET
5.1.7 Multi pressure
Tools:
VS18: Hexagon wrench key 2.5mm
VS26: Hexagon wrench key 3mm
By assembling blanking discs in ports 1, 3 and/or 5 as well as 12/14 you have the possibility to
porting different pressures.
1. Install blanking discs depending on required pressure isolation requirements during the
assembly of the modular sub-bases.
2. Generate pressure supply by connecting left and right end plate. Additionally, you have the
possibility to mount an intermediate supply/exhaust module on a valve station.
Screw Type
(thread) Valve
seize Tightening
torque in Nm Tightening
torque in Ibs Max. screw driver
speed in r.p.m.
11 M3x10 VS18 0.8 – 0.9 7.08 – 7.96 1100
11 M4x12 VS26 1.0 – 1.1 8.85 – 9.73 1100
20 M3x22 VS18 0.8 – 0.9 7.08 – 7.96 1100
20 M4x25 VS26 1.0 – 1.1 8.85 – 9.73 1100
VS2672926-KG00E_05/07 Page 23/97