Blanking plug for base connector hole – Norgren VS18 Series Valve Advantage User Manual
Page 31
Advertising
VS18/VS26
MAINTENANCE & INSTRUCTION BOOKLET
5.1.14 Blanking plug for base connector hole
For some applications an actuation of hard-wired valves on VS base (eg. safety function) is
required.
The assembly of Mini ISO valves on VS sub-bases is possible due to the same
pneumatical interface. In these cases, the base connector hole is open. The IP65 blanking plug
protects PCB from dirt and humidity.
VS2672926-KG00E_05/07 Page
31/97
Advertising
This manual is related to the following products: