Norgren VS18 Series Valve Advantage - Manual (Page 70)

VS18/VS26 MAINTENANCE & INSTRUCTION BOOKLET
8.4.7 CANopen commissioning
Due to the increasing number of compatible CANopen master controllers it would be impractical
to create detailed instructions for commissioning the Norgren node on a particular master. All
Norgren CANopen products are conformance tested to the latest specification by an
independent authorised test site and are fully certified by the CiA (CAN in Automation). Because
of this, the help guide and manual supplied with the users chosen PLC should be used during
the commissioning stages of each Norgren node.
8.4.8 CANopen valve island expansion
The modular design of the VS18/VS26 valve islands allows easy modifications to the number of
valves while in the field. The system allows single station expansion for up to 4 valve stations.
For more information please refer to section
9 .
8.4.9 More information on CANopen
CiA: CiA DS 301-V4.01 CANopen Application Layer and Communication Layer
CiA: CiA DR 303-V1.1 CANopen Cabling and Connector Pin Assignment
CiA: CiA DR 305-V1.0 CANopen Layer Setting Services and Predocol (LSS)
Web sites
www.can-cia.org/canopen CAN in Automation
VS2672926-KG00E_05/07 Page 70/97