Overview, Using the proxy server – Konica Minolta bizhub 4750 User Manual

Page 74

Advertising
background image

[Applied Functions]

2-9

2.3

Configuring the FTP transmission operating environment

2

2.3

Configuring the FTP transmission operating environment

Overview

The FTP transmission is a function that transmits original data scanned on this machine to a specified folder
in the FTP server.

When the proxy server is used, you can configure settings so that the FTP server is accessed via the proxy
server.

When using the FTP transmission, follow the below procedure to configure the settings.

1

Configure settings for connecting to the network such as setting of the IP address of this machine

% For details on configuring the setting, refer to page 1-3.

2

Configuring basic settings for the FTP transmission

% For details on configuring the setting, refer to page 2-9.

3

Set the following options according to your environment

Configuring basic settings for the FTP transmission

Enable the FTP transmission. In addition, configure settings for connecting to the FTP server.

In the administrator mode, select [Network] - [FTP Settings] - [FTP TX Settings], then configure the following
settings.

Using the proxy server

When the proxy server is used in your network environment, you can configure settings so that the FTP server
is accessed via the proxy server.

To use the proxy server, register the proxy server information on this machine.

In the administrator mode, select [Network] - [FTP Settings] - [FTP TX Settings], then configure the following
settings.

Purpose

Reference

Send files to the FTP server via the proxy server

page 2-9

Settings

Description

[FTP TX]

Select [Enable] to use the FTP transmission function.
[Enable] is specified by default.

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the FTP
server.
[60] sec. is specified by default.

Settings

Description

[Proxy Server Address]

Enter the proxy server address.
Use one of the following formats.

Example of host name entry: "host.example.com"

Example of IP address (IPv4) entry: "192.168.1.1"

Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Proxy Server Port
Number]

If necessary, change the proxy server port number.
[21] is specified by default.

Advertising
This manual is related to the following products: