Konica Minolta bizhub 4750 - Manual (Page 77)

2.5 Configuring the WS Scan operating environment 2
[Applied Functions] 2-12
2.5 Configuring the WS Scan operating environment
Overview
The WS scan transmission is a function that transmits original data scanned on this machine to the computer
on the network on the computer loaded with Windows Vista or later (Windows Vista/7/8/8.1/Server
2008/Server 2008 R2/Server 2012/Server 2012 R2).
The computer uses the Web service function of Windows to automatically detect this machine connected to
the network and smoothly install this function as a Web service scanner.
HTTP is used for communication between this machine and the computer. Use SSL to encrypt a communi-
cation between this machine and the computer; you can send a file more securely.
When using the WS scan transmission, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 1-3.
2
Configuring the basic settings for the WS scan transmission
% For details on configuring the setting, refer to page 2-12.
3
Set the following options according to your environment
d
Reference
For details on how to configure settings on the computer, refer to [User's Guide: Scan Functions].
Configuring the basic settings for the WS scan transmission
Enable the scan using the Web service. In addition, configure settings used to detect this machine using the
Web service, information for this machine as a scanner, and the method to connect to this machine.
1
In the administrator mode, select [Network] - [Web Service Settings] - [Common Settings], then config-
ure the following settings.
2
In the administrator mode, select [Network] - [Web Service Settings] - [Scanner Settings], then config-
ure the following settings.
Purpose Reference
Communicate with the computer using SSL page 2-13
Settings Description
[Friendly Name] Enter the name of this machine to be displayed when this machine is searched
for using the Web service through a computer (using up to 127 bytes).
Settings Description
[Scan Function] Select [Enable] to use the WS scan transmission function.
[Enable] is specified by default.
[Scanner Name] Enter the name of this machine when using it as the WS scanner (using up to
127 bytes).
[Scanner Location] If necessary, enter the installation location of the scanner (using up to 127
bytes).
[Scanner Information] If necessary, enter the scanner information (using up to 127 bytes).
[Connection Timeout] Change the time-out time to limit a communication with the computer if nec-
essary.
[120] sec. is specified by default.