Konica Minolta bizhub 420 - Manual (Page 100)

Reception 4
bizhub 500/420 4-5
Reception
Chapter 4
4.4 Unable to Receive
When you cannot receive faxes, the error message is displayed. Take cor-
rective actions by referring to “Error Message Displayed” on page 5-5. Press
[Stop] to clear the error message display.
!
Detail
If the external telephone continues to ring, Receive mode (Auto/Man) may
be set to Manual RX in FAX initial settings of Utility Mode.
This must be set to Auto RX to receive documents automatically. For de-
tails, see “Telephone Line Settings” on page 11-25.
Documents may not be able to be received memory is full. In addition,
check that there is paper in the paper tray.
For details, see “Cannot Receive Messages” on page 5-3.