Konica Minolta bizhub 420 - Manual (Page 231)

11 Utility Mode
11-6 bizhub 500/420
Utility Mode
Ch
ap
te
r 11
11.2.3 User Setting >> Initial Setting
Set the default of the Fax function. (page 11-16)
11.2.4 Administrator Setting >> System Setting >> Power Save
Setting>> Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax). (page 11-18)
11.2.5 Administrator Setting >> Fax Setting >> Header Informa-
tion
Register the Sender Name and the Fax ID. (page 11-20)
11.2.6 Administrator Setting >> Fax Setting >> Header/Footer Po-
sition
Set the method of specifying the sender information and the reception infor-
mation. (page 11-22)
Item Description Available value
Fax [Current Setting]:
Before entering the Utility Mode, each of
the items that have been set on the touch
panel is registered as the default of fax
function.
[Factory Default]:
Values set when shipped from the factory
are registered as the default of fax function. Current Setting / Factory
Default
*
Item Description Available value
Entering Power
Save Mode
(Fax) If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception. Normal
*
/ Immediately
Item Description Available value
Sender Name The name registered is printed on the doc-
ument received by the other party as a
sender information. Up to 30 in characters
and symbols.
Sender Fax No. The Fax ID registered is printed on the doc-
ument received by the other party as a
sender information.
The FAX number of the machine is normally
entered. Up to 20 characters with
0 to 9, +, space, * and #
used.
Item Description Available value
Header Posi-
tion
*1
Set a position in which the sender informa-
tion is printed. Inside Body Text / Out-
side Body Text
*
/ OFF