Konica Minolta bizhub 420 - Manual (Page 35)

2 Before Use
2-6 bizhub 500/420
Be
fo
re
Us
e
Chapter 2
2.3 First-Use Settings
2.3.1 Must-Set Items
After installation, you must set the following items to use the facsimile func-
tions. You will not be able to execute the FAX communication if these items
are not set properly.
-
Header Information
– Registers the FAX number and name of this facsimile.
- Telephone Line settings
– Sets the telephone line and the receiving method.
Header Information
Set the following items.
!
Detail
For details, see “Header Information” on page 11-20.
Telephone Line Settings
Set the following items.
!
Detail
For details, see “Telephone Line Settings” on page 11-25.
Sender Name Set the name of this machine. The name is a string of up to 30
characters. The name can contain with any alphanumeric charac-
ter and symbols.
Sender Fax No. Set the FAX number of this machine. The FAX ID is a number of
up to 20 digits. The ID can contain any number between 0 and 9,
the + symbol, spaces, * symbol, and # symbol.
Dialing Method Select between tone dialing line and pulse dial line (PB, Pulse).
Receive Mode Select between automatic reception and manual reception. Se-
lect “Auto RX” for automatic reception.
Select “Manual RX” if you often receive calls to an external hand-
set connected to this machine.