Konica Minolta bizhub 420 - Manual (Page 252)

Utility Mode 11
bizhub 500/420 11-27
Utility Mode
Ch
ap
te
r 11
4
Select the item you wish to set.
– Use or to go to the next or previous screen.
– To close the Utility Mode screen, press [Exit] in the sub-area.
5
Select the parameter you wish to set.
– To change [Line Monitor Sound Volume], press [Line Monitor
Sound Volume] and then [Lower] or [Higher] to set the level, and fi-
nally press [OK].
6
Press [Close].
The value of the parameter is changed.
7
Press [Exit] on the sub-area.