Konica Minolta bizhub 420 - Manual (Page 270)

Utility Mode 11
bizhub 500/420 11-45
Utility Mode
Ch
ap
te
r 11
5
Select [ON] for [PC-Fax RX Setting].
– The displays are different depending on the country.
– OFF: The PC-FAX RX feature is not available.
– ON: The PC-FAX RX feature is made when either of the fax
number and the PC-Fax number is received, and a
document received is stored in the specified box.
6
For [RX- Output], select a box into which a document received by the
PC-FAX RX feature is stored.
– Fixed Box: a received file is sent to Memory RX User Box.
– Specified Box: a received file is sent to a box specified by F Code
(SUB).
– When you want to stop the setting, press [Cancel].
– For the operations while in the reception of the PC-FAX RX feature,
see "Operations of the PC-FAX RX feature" (p. 2-21).
7
Press [OK] and then press [Close].
The setting is changed and you return to the Utility Mode screen.