Konica Minolta bizhub 420 - Manual (Page 232)

Utility Mode 11
bizhub 500/420 11-7
Utility Mode
Ch
ap
te
r 11
*1
The displays are different depending on the country.
11.2.7 Administrator Setting >> Fax Setting >> Telephone Line
Settings
Set items relevant to transmission and reception. (page 11-25)
*1
The displays are different depending on the country.
*2
The setting value is different depending on the country.
Footer Position Set the reception time and the reception
number if they are printed or not on the
document received. Inside Body Text / Out-
side Body Text / OFF
*
Item Description Available value
Dialing Method
*1
Set the method of dialing. PB
*
/ 10pps
Receive Mode Set to [Auto RX] for automatic reception.
And set to [Manual RX] when a lot of tele-
phone calls are made with an external tele-
phone connected or when the remote
reception function is employed. Auto RX
*
/ Manual RX
Number of RX
Call Rings Set the number of receptions.
Set the number of the pseud-ringback
tones from the arrival of a message to the
start of reception. 0-15 (2 times
*
)
Number of Re-
dials
*2
Set the number of redials when no re-
sponse is available due to the other party
being busy. 0-7 (3 times
*
)
Redial Interval Set the intervals between the redials. 1-15 (3 min.
*
)
Line Monitor
Sound Set to ON when you want to hear the sound
on the line through the speaker while in
transmission. ON / OFF
*
Line Monitor
Sound Volume Set the sound volume of the speaker. 0-31 (16
*
)
Item Description Available value