Konica Minolta bizhub 420 - Manual (Page 153)

7 Transmission Applications
7-32 bizhub 500/420
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
3
Press [F-Code TX].
4
Enter the Relay Box No. of the relay station (sub-address) in the Sub
Address and the relay password of the relay station in the Password
box from the keypad.
– [SUB Address] and [Password] are a number of up to 20 digits.
– Numerals of 0-9, and symbols # and * can be used for [Password].
– To correct the wrong entry, use [Del.].
– Press [C] (clear) to clear the whole entry.
– To release the setting, press [OFF].
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
7
Set other functions if necessary.
– See “Setting Transmission Conditions” on page 3-10 for informa-
tion about setting functions in the FAX screen. See “Application
Functions Overview” on page 7-4 for information about setting
functions in the FAX Application screen.