Konica Minolta bizhub 420 - Manual (Page 27)

1 Introduction
1-18 bizhub 500/420
In
tr
od
uc
ti
on
Chapter 1
1.6 User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations]
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-
Refer to this User’s Guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
Furthermore and this manual contains details on the setting method of the
customize for using usually, and the management method of a machine.
-
Refer to this User's Guide for details on the setting method of a paper,
the adjustment method of a tray, the setting method of a machine and the
method of management of a machine.
User’s Guide [Network Scanner Operations]
This manual contains details on specifying network settings for standard
equipment and on operations for scanning functions.
-
Refer to this User’s Guide for details on operating procedures for network
functions and for using Scan to E-Mail, Scan to FTP and Scan to SMB.
User’s Guide [Box Operations]
This manual contains details on operating procedures for using the boxes.
-
Refer to this User’s Guide for details on operating procedures for using
the boxes on the hard disk.
User’s Guide [Enlarge Display Operations]
This manual contains details on operating procedures for using copy func-
tions in Enlarge Display mode.
-
Refer to this User’s Guide for details on operating procedures in Enlarge
Display mode.
User’s Guide [Facsimile Operations] <this manual>
This manual describes the operation of the FAX functions which can be used
when the optional fax kit, FK-502, is installed.
-
Refer to this User's Guide for details on the operation of the FAX func-
tions.