Konica Minolta bizhub 420 - Manual (Page 15)

1 Introduction
1-6 bizhub 500/420
In
tr
od
uc
ti
on
Chapter 1
7. Telepermitted equipment only may be connected to the auxiliary tele-
phone port. The auxiliary port is not specifically designed for 3-wire con-
nected equipment. 3-wire might not respond to incoming ringing when
connected to this port.
1.1.4 For Europe
The Facsimile has been approved in accordance with Council Decision 1999/
5/ EC for pan-European single terminal connection to the public switched tel-
ephone network (PSTN). However, due to differences between the individual
PSTNs provided in different countries, the approval does not, of itself, give
an unconditional assurance of successful operation on every PSTN network
terminal point.
In the event of problems, you should contact your equipment supplier in the
first instance.
The CE marking must be affixed to the
product or to its data plate. Additionally it
must be affixed to the packaging, if any,
and to the accompanying documents.