Konica Minolta bizhub 420 - Manual (Page 152)

Transmission Applications 7
bizhub 500/420 7-31
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.12 Relay Transmission Request (F-Code TX)
Relay Transmission Request
Relay transmission request is the bridging of transmissions to several desti-
nations via an intermediate (relay) station. If the destinations to which you in-
tend to transmit are far, this function allows you to cut down the
communication costs. You can organize groups of stations, each of which
consists of one relay station and several destinations.
0 Specifications
Relay TX Req can be used only when the Relay TX Req feature is enabled
in the Utility Mode. For details, see “Function Setting” on page 11-31.
We define the originating station as that which issues a relay request, the
relay station as that which relays transmissions, and the terminating sta-
tions as that which receive and terminate communications.
To use Relay TX Req, a Relay Box No., relay password and destination
group No. must be defined at the relay station.
Relay TX Req can be used only when the relay station incorporates the
F-code feature.
0 Functions incompatible
Polling TX (Normal), Polling RX (Normal), Bulletin Board Registration,
Polling RX (Bulletin), Password TX
1
Press [Fax] on the control panel to view the FAX screen, if it is not al-
ready displayed.
2
Press [Comm. Setting].
Original Station
Remote Station
Remote Station
Intermediate relay station
Toll call
Local call