Tx/rx setting – Konica Minolta bizhub 420 User Manual
Page 254
Advertising
Utility Mode
11
bizhub 500/420
11-29
Utility Mode
Ch
ap
te
r 11
TX/RX Setting
1
Open the Administrator Setting screen (See “Entering Administrator
Setting” on page 11-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional set-
tings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax Set-
ting], enter 8 through the numeric keypad.
3
Press [TX/RX Setting].
Advertising
This manual is related to the following products: