6 pc-fax rx setting, Pc-fax rx setting -43, 6pc-fax rx setting – Konica Minolta bizhub 420 User Manual
Page 268
Utility Mode
11
bizhub 500/420
11-43
Utility Mode
Ch
ap
te
r 11
11.11.6PC-FaX RX Setting
The following discusses how to switch the PC-FAX RX feature ON/OFF.
When set to ON, set the Box as a location to which the output is made.
The PC-FAX RX feature offers a procedure for saving files containing re-
ceived FAXes in Boxes on the hard disk. The files saved in Boxes can be read
into computers on the network.
Using the PC-FAX RX feature requires the optional hard disk. Contact the
service representative for the optional hard disk.
*
indicates factory default setting.
!
Detail
Setting the PC-Fax RX Setting to ON makes it impossible to select the
Memory RX, the TSI User Box Setting and the Forward TX Setting.
The Fax-receiving documents are stored in the TIFF format at Fixed Box
or Specified Box or Sender (TSI) RX Box.
Item
Description
Available value
PC-Fax RX Set-
ting
The PC-FAX RX feature offers a pro-
cedure for saving files containing re-
ceived faxes in Boxes on the hard
disk.
ON / OFF*
RX Output
Stored in the Memory RX User Box
when set to the Fixed Box. However,
when set to the Specified Box, it is
stored in the box that has been spec-
ified by the F code (SUB).
Fixed Box* / Specified Box