13 report settings, 13 report settings -52, Utility mode ch ap te r 11 – Konica Minolta bizhub 420 User Manual

Page 277

Advertising
background image

11

Utility Mode

11-52

bizhub 500/420

Utility Mode

Ch

ap

te

r 11

11.13 Report Settings

You may select the Report Settings to be On or Off. This settings prints the
reports of communication management, communication result and reserva-
tion, and the input/output trays for the reports. If ON is selected, the manner
of printing may also be selected.

*

indicates factory default setting.

*1

Tray type may be different depending on the installed option.

*2

Tray1 is default, when the option is not installed.

!

Detail

Select ON in “TX Result Report Check” the TX Report will be printed if
YES is selected. The report will not be printed if NO is selected.

Item

Description

Available value

Activity Report

Determines whether to print the report and
the timing at which the report will be printed
out.

OFF / Daily / Every 100
Comm.

*

/ 100/Daily

TX Report

ON / If TX Fails

*

/ OFF

Sequential TX
Report

ON

*

/ OFF

Timer Reserva-
tion TX Report

ON

*

/ OFF

Confidential RX
Report

ON

*

/ OFF

Bulletin TX Re-
port

ON

*

/ OFF

TX Result Re-
port Check

Determines whether to display the trans-
mission result report select screen. If you
select “ON”, it will be displayed after each
transmission.

OFF

*

/ ON

Advertising
This manual is related to the following products: