Konica Minolta bizhub 420 - Manual (Page 63)

3 Transmission
3-12 bizhub 500/420
Tr
an
sm
iss
ion
Chapter 3
3.3.3 Simplex/Duplex
This is used to set the manner in which originals are scanned according to
the type of original. There are 2 types. Single sided is set at the time of pur-
chase.
3.3.4 Resolution
This is used to set the fineness at which originals are to be scanned. The fol-
lowing 4 settings are available for Resolution. Fine is set at the time of pur-
chase.
Dark Press to scan originals so that they are darker than the density
detected with Standard.
Single sided Press this when scanning one-sided originals.
Double sided Press this when scanning two-sided originals.
Std. Press this when the sending time is cut short.
Fine Press this when scanning normal originals.
Super Fine Press this when scanning originals containing small graphics or
text.
Ultra Fine Press this when scanning originals containing especially fine
graphics or text.