Konica Minolta IF-118 - Manual (Page 103)

6 Using Internet Faxing Operations
6-4 IF-118
5 Using the 10-key pad, enter the e-
mail address of the recipient.
❍ “Specifying the Destination
Using One-Touch Dial Keys” on page 4-10.
❍ “Specifying the Destination Using Speed Dial Numbers” on
page 4-11.
❍ “Specifying the Destination Using the Tel Book {Phone Book}” on
page 4-13.
❍ For information on entering text, refer to “Entering Text
Characters” on page 2-10.
❍ If the 10-key pad is being used to enter the address, you can press
the
key after entering the e-mail address to specify detailed
transmission mode settings. For information on specifying these
settings, refer to “Changing the Transmission Mode Settings” on
page 6-6.
6 Press the [START] key.
7 Check that the correct document
size appears on the screen.
❍ To change the document size,
press the
key, and then use
the and keys to select
the desired document size on
the screen.
8 Press the [YES] key. Scanning starts.
9 When scanning a document
containing several pages, place the
next page on the original glass
when the screen shown at the right
appears, and then press the [YES] key.
❍ Repeat step 9 until of the pages in the document have been
scanned.
10 Press the [START] key. The scan data is sent to the recipient.
❍ A beep sounds to indicate that the transmission has been
completed.