Specifying the pop3 server address – Konica Minolta IF-118 User Manual
Page 45
3
Getting Ready
3-18
IF-118
3.2.2.3 Specifying Other E-mail Settings (“E-MAIL SETTING 2” Menu)
The settings for the E-MAIL SETTING 2 functions are specified from the
“E-MAIL SETTING 2” menu in Utility mode.
This section describes how to specify settings for the following functions.
G
POP3 SERVER
G
POP3 PORT NO.
G
POP3 TIMEOUT
G
POP3 ACCOUNT
G
POP3 PASSWORD
G
AUTO RECEPTION
G
REPLY ADDRESS
G
HEADER PRINT
✎
Tip
If you wish to cancel a change to a setting before applying it, press the
[NO] key. Press the [YES] key after the message “STOP SETTING?”
appears.
Specifying the POP3 Server Address
1
Press the [UTILITY] key. The Utility
mode menu appears.
2
Press the
or
key until “E-
MAIL SETTING 2” appears.
3
Press the [1] key on the 10-key pad
to select “POP3 SERVER”.
4
Enter the IP address or host name
of the POP3 server.
❍
For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍
Up to 64 characters can be entered for the host name.
[ ]