Registering the sender’s name – Konica Minolta IF-118 User Manual
Page 39
3
Getting Ready
3-12
IF-118
3.2.2.2 Specifying the E-mail Settings (“E-MAIL SETTING 1” Menu)
The settings for the E-MAIL SETTING 1 functions are specified from the
“E-MAIL SETTING 1” menu in Utility mode.
This section describes how to specify settings for the following functions.
G
SENDER NAME
G
E-MAIL ADDRESS
G
SMTP SERVER
G
SMTP PORT NO.
G
SMTP TIMEOUT
G
TEXT INSERT
G
DEFAULT SUBJECT
G
E-MAIL MODE
✎
Tip
If you wish to cancel a change to a setting before applying it, press the
[NO] key. Press the [YES] key after the message “STOP SETTING?”
appears.
Registering the Sender’s Name
1
Press the [UTILITY] key. The Utility
mode menu appears.
2
Press the
or
key until “E-
MAIL SETTING 1” appears.
3
Press the [1] key on the 10-key pad
to select “SENDER NAME”.
4
Enter the sender name.
❍
For information on entering text,
refer to “Entering Text
Characters” on page 2-10.
❍
Up to 20 characters can be entered for the sender name.
[ ]