Konica Minolta IF-118 - Manual (Page 89)

4 Using Scan to E-mail Operations
4-12 IF-118
4.4 Specifying the Destination Using Group Dial Keys
✎
Note
The group dial setting must have already been specified.
For information on setting up group dial keys, refer to “Adding
Destinations” on page 3-32.
If at least one fax number is registered as a recipient with a group dial
key, that group dial key cannot be used with the Scan to E-mail
transmission. In this case, the message “NOT E-MAIL ADDRESS”
appears in the display.
1 Press the one-touch dial key
([01] to [27]) programmed with
the group where you want to
send the scan data.