Konica Minolta IF-118 - Manual (Page 63)

3 Getting Ready
3-36 IF-118
Specifying the Settings for a Group Dial Key
1 Press the [UTILITY] key.
2 Press the or key until “FAX
REGISTRATION” appears.
3 Press the [3] key on the 10-key pad
to select “GROUP DIAL”.
4 Press the one-touch dial key where
you wish to add a group dial setting.
5 Enter a group name, and then press
the [YES] key.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 20 characters can be entered for the group name.
6 Use the one-touch dial keys and
speed dial numbers to enter the
address for the recipient.
✎
Tip
For information on changing or deleting e-mail addresses that
have already been registered, refer to the manual provided with
the fax unit. To delete the currently displayed destination, press the
[NO] key, and then select a new recipient.
7 Select the next destination, and
then press the [YES] key.
❍ Repeat steps 6 and 7 until all of
the destinations have been specified.
❍ Up to 50 destinations can be specified for one group dial key.
❍ In this case, the numbers of destinations specified for the one-
touch (group dial) key are added to the current group dial setting.