Konica Minolta IF-118 - Manual (Page 65)

3 Getting Ready
3-38 IF-118
3.3.2 Using PageScope Light To Add Addresses
Specifying Settings for One-Touch Dialing
From the page displayed by clicking “One-Touch Dial Setting” in the menu
on the “Fax” tab, one-touch dial settings for the copier can be specified.
1 2 3 4 5
1 No. One-touch dial number (01 to 27)
2 Name The name of the destination for the one-touch dial setting
3 Destination address The address programmed for the one-touch dial setting
Depending on the type of destination, this address can be
a fax number or an e-mail address.
4 Timer Transmission The send time is displayed for one-touch dial settings
specified for time transmission.
5 [Delete] button Click this button to delete the selected one-touch dial
setting.