Konica Minolta IF-118 - Manual (Page 119)

6 Using Internet Faxing Operations
6-20 IF-118
6.8.1 Using the Forwarding Function
1 Press the [UTILITY] key.
2 Press the or key until “RX
OPERATION” appears.
3 Press the [6] key on the 10-key pad
to select “FORWARD”.
4 Press the and keys to select
“ON”, “ON (PRINT)” or “OFF”, and
then press the [YES] key.
❍ If “ON” or “ON (PRINT)” are selected, the screen for specifying the
forwarding destination appears. (Go to step 5.)
❍ If “OFF” is selected, the RX OPERATION screen appears again.
✎
Tip
If the option to forward and print the document (“ON (PRINT)”) is
selected, the received fax is forwarded to a destination and is also
printed at the same time.
5 The destination e-mail address or fax number can be entered using
the 10-key pad, or the one-touch dial keys or speed dial numbers.
6 Press the [YES] key.
❍ If an e-mail address was specified using the 10-key pad in step 5,
the screen for specifying the transmission mode appears. (Go to
step 7.)
❍ If, in step 5, an e-mail address was specified in any way other than
using the 10-key pad or if a fax number was specified, the RX
OPERATION screen appears.
7 Press the and keys to select
“BASIC” or “ADVANCED” as the
transmission mode, and then press
the [YES] key.
❍ If “ADVANCED” is selected, the screen for specifying the
maximum document size for transmission appears. (Go to step 8.)
❍ If “BASIC” is selected, the RX OPERATION screen appears.