Konica Minolta IF-118 - Manual (Page 79)

4 Using Scan to E-mail Operations
4-2 IF-118
4.1 Transmission Procedures
4.1.1 Using the Automatic Document Feeder
1 Press the [SCAN] key.
The copier switches to Scan mode,
and the Scan screen appears.
2 Place the document to be scanned
in the Automatic Document Feeder.
❍ Adjust the guides to the size of
the document.
❍ Load the document with the
surface to be scanned face up.
3 Press the [123/ABC] key.
4 Press the keys on the 10-key pad to
enter the e-mail address, and then
press the [YES] key. The e-mail
address can also be specified using
one of the following methods.
❍ “Specifying the Destination Using One-Touch Dial Keys” on
page 4-10.
❍ “Specifying the Destination Using Speed Dial Numbers” on
page 4-11.
❍ “Specifying the Destination Using the Tel Book {Phone Book}” on
page 4-13.