Konica Minolta IF-118 User Manual
Page 80
Using Scan to E-mail Operations
4
IF-118
4-3
❍
To skip specifying the subject line, resolution, etc., press the
[START] key, instead of the [YES] key.
5
Enter a title (subject), and then
press the [YES] key.
6
Enter the e-mail address for any
additional recipient, and then press
the [YES] key.
❍
To specify more then one CC address, press the [YES] key to enter
the additional addresses. Repeat step 6 until all of the recipients
have been specified.
7
After you have finished specifying
the addresses for additional
recipients, press the [YES] key.
8
Press the
and
keys to select
the resolution (150
× 150 dpi, 300 ×
300 dpi, or 600
× 600 dpi), and then
press the [YES] key.
❍
To specify detailed settings for the scan mode, press the
key.
❍
For information on specifying detailed settings, refer to “Changing
the Scan Mode Settings” on page 4-6.
9
Press the
and
keys to
select “ADF”.
10
Press the [START] key.
Scanning starts, and the scan data is sent to the recipients.