Konica Minolta IF-118 - Manual (Page 30)

Getting Ready 3
IF-118 3-3
DNS
CONFIG. This function is
used to enable
or disable the
DNS (Domain
Name System)
setting. If there
is a DNS server
on your
network, enter
the IP address
of the DNS
server.
*If the DNS
server is
located within
your local
network, select
“ENABLE”. If
you are using
the DNS server
of an Internet
service provider
(ISP) or some
other DNS
server located
outside your
local network,
select
“DISABLE”.
Consult your
network
administrator
for details. ● ● ● - 2 2
GATEWAY
TX This function is
used to enable
the Direct Fax
function. - - - 2 2 -
E-MAIL SETTING 1
SENDER
NAME This function is
used to specify
the sender's
name. 2 2 ●*1 - 2 2
E-MAIL
ADDRESS This function is
used to specify
the e-mail
address of the
sender.
Consult your
network
administrator
for details. 2 2 ●*1 - 2 2
Function Description
Internet
Faxing
Scan
to E-
mail Scan
to
Server
Direct
Fax
Setting
Control
panel PageScope
Light